展开左侧菜单栏
Site Map
About US
Who We are What we do
NEWS
Company NEWS Industry NEWS
Products
Three-phase
ASIC Series
Single-phase
ASIC Series
Gate Driver Series MOSFET Series MCU Series IPM Series
Support
Consumers electronic Electric tools Sports & travel gadget IT and Communication equipment Robotics Industry and automobile
Downloads
Development Kit Data Manual Application Manual Videos
R&D
Our Technology Typical Applications Technical Document
Contact
Contact Us Advisory
ES9676AH
Description
ES9676AH is a fully-integrated IPM with motor controller, driver and power IC. Its high-performance motor
drive chip incorporates ME core and 8051 core. ME core integrates FOC, MDU, LPF, PI and SVPWM modules
that allow for automatic calculation of FOC or square-wave control by the hardware for sensored/sensorless
BLDC/PMSM motors. 8051 core is used for parameter configuration and routine processing. Most of 8051 core
instruction cycle takes 1T or 2T clock cycle(s). The dual cores work in parallel to achieve high-performance motor
control. The chip integrates high-speed operational amplifiers, comparators, high-speed ADC, CRC, UART,
Timers, PWM module and built-in high-voltage LDO, which are suitable for FOC or square-wave based
BLDC/PMSM motors.
Package of ES9676AH: WBQHFBP-45L.
Features
Features
◼ Power supply:
➢ External power supply 12V~20V is connected to VCC pin, and internal LDO supplies VDD5
voltage.
◼ MOSFET:
➢ N-Channel:
◆ VDS = 600V
◆ ID = 4A
◆ RDS = 1.1Ω
◼ Dual core: 8051 core and ME core. ME core achieves automatic calculation of FOC or square-wave
control by the hardware for BLDC motors, and 8051 core is used for parameter configuration and
routine processing.
◼ An instruction cycle mostly takes 1 or 2 system clock cycle(s)
◼ 16kB Flash ROM with CRC, self-program and code protection
◼ 256 bytes IRAM and 768 bytes XRAM
◼ ME: Core integrating LPF module, PI regulator, BLDC module, FOC module, MDU auxiliary
computing module
◼ 1T 16x16 multiplier, 16T 32/16 divider
◼ 15 interrupt sources with 4 configurable priority levels
◼ 18*GPIOs
◼ Timers:
➢ 2*Programmable timers with capture feature
➢ 1*QEP decoding programmable timer
➢ 1*BLDC motor dedicated timer
➢ 1*General-purpose timer
➢ 1*RTC
◼ Communication interfaces:
➢ 1*SPI
➢ 1*UART, supporting single-wire mode
➢ Dual-channel DMA: supporting data transmission via SPI/UART
◼ Analog peripherals:
➢ 12-bit ADC, operating with 1μs conversion time and internal VREF or external VREF selectable
as reference voltage
➢ Number of ADC channels: 10
➢ Internal VREF. 3V, 4V, 4.5V and VDD5 can be selected as the internal reference.
➢ Three standalone operational amplifiers
➢ 2-channel analog comparator
➢ 9-bit DAC
◼ FOC module supports single/dual/triple-shunt current sampling
◼ FOC module supports overmodulation
◼ System clock
➢ Built-in 20MHz high-speed RC oscillator
➢ Built-in 32.8kHz low-speed RC oscillator
◼ WDT
◼ LVD
◼ TSD
◼ Two-wire FICE protocol based in-circuit emulation
Package
WBQHFBP-45L
Datasheet

Download